Lightweight active embedded GNSS antenna

TDXL-BA730

For geodetic and marine surveying, precision agriculture and deformation-monitoring equipment. Match the selected signals and mechanical interface to your receiver and installation.

LNA gain
34 ± 2 dB
Connector
MCX
Weight
≤100 g

Model overview

TDXL-BA730 is a lightweight active embedded GNSS antenna with an MCX connection. Its listed frequency range is 1205–1278 MHz · 1559–1615 MHz. Use the assembly dimensions to reserve space inside the equipment, including the cable and connector.

Integration requirements

  • System positioning performance depends on the receiver, corrections and installation.
  • Allow space for the antenna, ground plane, cable routing and connector inside your enclosure.

Technical specifications

TDXL-BA730 — Technical specifications
Listed signal selectionBDS B1I/B1C/B2b/B3I · GPS L1/L2 · GLONASS G1/G2 · Galileo E1/E5b
Operating frequency1205–1278 MHz · 1559–1615 MHz
Impedance50 Ω
PolarizationRHCP
Maximum antenna gain≥4 dBi
Axial ratio≤3 dB
Horizontal coverage360°
Phase center error≤2 mm
LNA gain34 ± 2 dB
Noise figure≤2 dB
In-band flatness±2 dB
Operating voltage3–12 V DC
Current draw≤40 mA
Dual-frequency delay difference≤5 ns
Output VSWR≤2:1
Operating temperature−40°C to +80°C
Storage temperature−45°C to +85°C
Humidity, non-condensing95% RH
ConnectorMCX
Weight≤100 g
Dimensions59 mm × 63 mm × 17 mm
Mounting interface4 × M2

Project applications

Start with the measurement task, then match the receiver, antenna format and installation. These project contexts help define the configuration to evaluate.

OEM receiver assemblies

For a receiver with an internal antenna, reserve space for the antenna, mounting hardware and MCX connection. Review the enclosure material, nearby electronics and cable bend clearance as part of the assembled receiver layout.

Integrated field equipment

For positioning equipment used in surveying or precision agriculture, define the receiver signals and installed antenna orientation first. Test the complete enclosure and RF chain with the intended correction method before finalizing the configuration.

Plan the installation

Compare your options

Compare the actual signal selection and installation format, not the model number alone.

Purchasing questions

Does the antenna provide RTK?

The antenna is one part of the positioning system. RTK operation and accuracy depend on the receiver, correction data, installation and operating conditions. Specify the full system and accuracy target when requesting a model recommendation.

Will it match my receiver?

Compare the exact signals, antenna-port electrical requirements and mating connector. Review the complete RF gain and cable losses with the receiver’s input range. A matching connector alone is not enough to select an antenna.

What should I send for a quote?

Send the model, receiver, required signals, cable length, connector, mounting drawing and quantity. Include calibration or environmental requirements and your sample evaluation schedule so the configuration can be discussed before ordering.

Can the cable or mount change?

Describe the required cable assembly, connector and installation envelope. OEM/ODM work is reviewed on the existing platform for each project. Agree the electrical and mechanical configuration and sample evaluation requirements before a production order.

Get a Quote

Discuss TDXL-BA730 for your project

Share your receiver model, bias voltage, required signals, cable length, connector, enclosure and quantity. We can review deeper customization on the existing platform; feasibility is confirmed for each project.

24-hour response guarantee

Selected model: TDXL-BA730

Complete the verification above to send your inquiry.