TDXL-BA800 — Broadband active external GNSS antenna

Broadband active external GNSS antenna

TDXL-BA800

For surveying, deformation monitoring and reference-station projects. Check the antenna calibration and installation requirements of your network before selection.

LNA gain
38 ± 2 dB
Connector
TNC-K
Weight
≤350 g

Model overview

TDXL-BA800 is a broadband active external GNSS antenna with a TNC-K connection. Its listed frequency range is 1164–1300 MHz · 1520–1615 MHz. Compare its signal selection with your receiver and plan external mounting and the RF cable as one installation.

Integration requirements

  • System positioning performance depends on the receiver, corrections and installation.
  • Match any L-band correction service to the required frequency, receiver and service plan.
  • Include the connector seal and mounting arrangement in the outdoor installation design.

Technical specifications

TDXL-BA800 — Technical specifications
Listed signal selectionBDS B1I/B1C/B2a/B2b/B3I · GPS L1/L2/L5 · GLONASS G1/G2 · Galileo E1/E5a/E5b/E6
Operating frequency1164–1300 MHz · 1520–1615 MHz
Impedance50 Ω
PolarizationRHCP
Maximum antenna gain≥5.5 dBi
Axial ratio≤3 dB
Horizontal coverage360°
Phase center error±2 mm
LNA gain38 ± 2 dB
Noise figure≤2 dB
In-band flatness±2 dB
Operating voltage3–12 V DC
Current draw≤35 mA
Dual-frequency delay difference≤5 ns
Output VSWR≤2:1
Operating temperature−40°C to +80°C
Storage temperature−45°C to +85°C
Humidity, non-condensing95% RH
ConnectorTNC-K
Weight≤350 g
Ingress protectionIP67

Project applications

Start with the measurement task, then match the receiver, antenna format and installation. These project contexts help define the configuration to evaluate.

Reference stations

For a reference-station project, define the receiver signals, antenna position and mounting arrangement together. Include any antenna calibration requirements and the cable route to the receiver in the selection brief.

Deformation monitoring

For monitoring a fixed point, plan a stable mount and a repeatable antenna position. Specify the observation schedule, receiver and correction method so the complete measurement system can be evaluated for the project.

Plan the installation

Compare your options

Compare the actual signal selection and installation format, not the model number alone.

Purchasing questions

Does the antenna provide RTK?

The antenna is one part of the positioning system. RTK operation and accuracy depend on the receiver, correction data, installation and operating conditions. Specify the full system and accuracy target when requesting a model recommendation.

Will it match my receiver?

Compare the exact signals, antenna-port electrical requirements and mating connector. Review the complete RF gain and cable losses with the receiver’s input range. A matching connector alone is not enough to select an antenna.

What should I send for a quote?

Send the model, receiver, required signals, cable length, connector, mounting drawing and quantity. Include calibration or environmental requirements and your sample evaluation schedule so the configuration can be discussed before ordering.

Can the cable or mount change?

Describe the required cable assembly, connector and installation envelope. OEM/ODM work is reviewed on the existing platform for each project. Agree the electrical and mechanical configuration and sample evaluation requirements before a production order.

Get a Quote

Discuss TDXL-BA800 for your project

Share your receiver model, bias voltage, required signals, cable length, connector, enclosure and quantity. We can review deeper customization on the existing platform; feasibility is confirmed for each project.

24-hour response guarantee

Selected model: TDXL-BA800

Complete the verification above to send your inquiry.