Tracking terminals
For a tracking-terminal project, identify the internal GPS antenna area and the receiver connection. Include the housing layout and the location of other radios in the design brief.

Ceramic patch antennas
A compact square GPS antenna assembly with a coaxial lead for integration into positioning devices.
WL-GPSI12122: 1575.42 MHz. This square patch GPS assembly is an option to compare when planning the antenna area within a positioning device. Review the complete installation around the patch, cable and receiver connection. A photograph or layout drawing of the proposed location helps explain enclosure clearance and cable access when discussing this model alongside WL-GPSI10104.
| Frequency | 1575.42 MHz |
|---|---|
| Impedance | 50 Ω |
| Polarization | RHCP |
| VSWR | <1.5 |
| Connector family | I-PEX / IPEX |
| Operating temperature | −30°C … +70°C |
Planning a positioning product? Use the project examples below to define the receiver, antenna location and connection you need.
For a tracking-terminal project, identify the internal GPS antenna area and the receiver connection. Include the housing layout and the location of other radios in the design brief.
For a handheld device, plan the square patch area alongside the display, battery and board. Describe how the device is held so antenna orientation can be considered in the installation.
Provide the receiver model and required signals. Review the antenna connection and receiver antenna-port requirements together with the frequency selection.
Share the intended antenna orientation, enclosure material and nearby metal parts. Evaluate reception in the assembled device, including its normal operating position.
Include the board layout and ground-plane arrangement in the installation review. Keep nearby electronics and radio transmitters in the same drawing rather than reviewing the antenna in isolation.
Specify the exact mating connector and required cable route. Allow access for assembly and include the space needed for the connection when checking the installed envelope.
Start with the receiver’s required frequencies, then compare the antenna format and the space available inside your device.
Compare the square GPS patch layout with your antenna location, board connection and cable access.
Compare a narrow rectangular GPS format when your planned antenna area is elongated rather than square.
Review the GPS and BeiDou frequency points when the receiver project calls for both requirements.
1575.42 MHz. Start with the signals required by your receiver. Share its model and signal list with your inquiry so frequency coverage can be matched to the antenna selection.
Send the mating connector part number or a clear board-connector drawing, together with the required cable route. The I-PEX / IPEX family name alone does not identify the exact mating pair.
Review antenna orientation, nearby metal, the board and cable access together. Assess reception with the device assembled in its intended operating position, not only with the antenna on a bench.
Include the antenna model, receiver, required signals, installation drawing, connector and cable requirements, and evaluation or order quantity. Add your target schedule so the team can discuss the project with you.
Get a Quote
Tell us the antenna model, receiver, required frequencies, connector and cable requirements, and order quantity to request a quote.